Rode NTG3 RF-Bias Broadcast Shotgun Microphone Silver
We ship throughout Karachi, Lahore, Islamabad, Rawalpindi and all over the country.
Get your order to your doorstep within 24 hours through iShopping’s Express Delivery (on eligible items).
About this Item
Rode Shotgun Microphone Delivered All Over Pakistan
iShopping.pk brings you the best price for Rode NTG3 RF-Bias Broadcast Shotgun Microphone Silver with express shipping all over Pakistan.
Details:
Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the black Rode NTG3 moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction.
The NTG3's high sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG3 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. The solid brass housing is both durable and lightweight, and its anti-glare finish prevents reflections in the shot.
Designed to Withstand Adverse Environmental Conditions
When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG3's RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.
Broadcast-Quality Sound
The NTG3 was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
The combination of the NTG3's 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
Phantom Powered
Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG3 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
Ideal for Boompole Mounting
The NTG3 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3 in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.
Windscreen Minimizes Wind Noise
The NTG3 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).
Specification:
|
Microphone |
Form Factor |
Stand/Boom Mount |
|
Sound Field |
Mono |
|
|
Operating Principle |
Line Gradient |
|
|
Capsule |
Condenser |
|
|
Diaphragm |
0.5" / 12.70 mm |
|
|
Polar Pattern |
Supercardioid |
|
|
Orientation |
End Address |
|
|
Circuitry |
Solid-State |
|
|
Pad |
None |
|
|
High-Pass Filter |
None |
|
|
Tone Adjustment |
None |
|
|
Gain Adjustment |
None |
|
|
Indicators |
None |
|
|
On-Board Controls |
None |
|
|
Windscreen |
Foam (Included) |
|
|
Performance |
Frequency Range |
40 Hz to 20 kHz |
|
Maximum SPL |
130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
|
|
Off-Axis Rejection |
8 dB at 60° |
|
|
18 dB at 120° |
||
|
17 dB at 180° |
||
|
Impedance |
25 Ohms |
|
|
Sensitivity |
-30 dBV/Pa at 1 kHz |
|
|
Output Level |
8.2 mV (Max) |
|
|
Dynamic Range |
117 dB |
|
|
Signal-to-Noise Ratio |
81 dB A-Weighted |
|
|
Equivalent Noise Level |
13 dB A-Weighted |
|
|
Output Connectors (Analog) |
1 x XLR 3-Pin |
|
|
Power |
Operating Voltage |
48 V ± 4 V |
|
Operating Current Consumption |
5 mA |
|
|
Physical |
Color |
Silver |
|
Mounting |
Mic Clip/Stand Adapter (with Included Hardware) |
|
|
Mounting Thread Size |
5/8"-27 Female (3/8"-16 Female with Included Adapter) |
|
|
Included Case |
Transport Tube, Zipper Pouch |
|
|
Construction Material |
Brass |
|
|
Dimensions |
ø: 0.75 x L: 10.04" / ø: 19 x L: 255 mm |
|
|
Weight |
5.75 oz / 163 g (Microphone) |
Features:
• For Indie Films, TV & Documentaries
• Moisture-Resistant for Humid Conditions
• Phantom Powered
• Simple Operation with No Controls
• Enhanced Immunity to RF Interference
• Low-Noise Circuitry
• High Sensitivity Requires Less Gain
• Slight Presence Boost & Bass Attenuation
• Windscreen Reduces Wind Noise
• Lightweight Housing
Specification
Customer reviews & ratings
How do I review this product
If you recently purchased this product from iShopping, you can go to your Orders page and click on the Submit Review button
How rate and review works?
Our reviews are from iShopping customers who purchased the product and submitted a review
Have a Look
-
Rode Stereo Video Mic On Camera MicrophoneRs. 68,985
